Super Heavy Antistatic polyurethane Ducting, microbe resistant

  • flexible hose/ ducting for high throughput of extremely abrasive bulk material, granulate and stone
  • plastic industry, conveying of granulates and powders: granulate conveying equipment, vacuum hopper/ conveyor, suction conveyor, dosing system, bulk-bag (big bag)-charging and discharging, shredder, mill, extruder, injection moulding machine
  • suction vehicles: roof gravelling, roof gravel conveying
  • vacuum truck, suction vehicle, dry suction truck: industrial cleaning, furnace cleaning
  • suction excavator
  • explosion hazard area
  • agricultural industry: pneumatic grain conveyer
  • concrete pump: outlet hose, discharge hose
  • construction industry: rock drill, rock drilling machine
  • raw material conveying hose for powders, granulates, sand, quartz, gravel, shards and chips/ shavings
  • compressor, side channel blower, vacuum pump, pressure pump, pump
  • paper mill, paper and pulp industry, packagingmachine: edge strip suctioning system/ edge trim exhaust systems
  • surface preparation: shot blasting/ sand blasting recovery e.g. at blasting chamber, ship yard, stripping machine, flooring preparation machine, grinding machine
  • silos and tankers: silo charging, silo discharging
  • silo and tankers: conveying of wood pellets, plastic granulate, plastic powder
  • super-heavy duty
  • extremely abrasion-resistant with reinforcement underneath wire and narrow hose pitch
  • microbe resistant
  • good resistance to oil, gasoline and chemicals
  • very good low temperature flexibility
  • permanently antistatic wall: according to ISO 8031 electrical and surface resistance <10⁹ Ω (according to TRGS 727 <2,5*10⁸ Ω*m and NFPA 652 10⁸-10⁹ Ω)
  • according to DIN 26057 Type 4
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: pneumatic transport of flammable dusts and bulk materials (Zone 20, 21, 22 inside), aspiration of combustible dusts (Zone 22 inside),
  • in accordance with ATEX 2014/34/EU (1999/92/EC) and German TRGS 727: for conveying for flammable liquids (inside zone 0,1, 2), for conveying for non-flammable liquids, for use in zone 1 and 2 (gases), for use in zone 0 (gases)
  • REACH according to --> Technology / Technical Information / REACH
  • conforms to RoHS guideline
  • -40°C to 90°C
  • short time to 125°C
  • AIRDUC® profile hose
  • spring steel wire firmly embedded in wall
  • wall: permanently antistatic premium esterpolyurethane (Pre-PUR®)
  • wall thickness 2,0 to 2,5 mm approx.
  • reinforcement of the primary abrasion areas
  • further diameters and lengths available on request
  • transparent (standard)
  • special colours: full coloured
  • customer-specific branding

Need help?

Our team are available to assist with any queries you may have.

0113 253 5569

Download Data Sheet

Other products